Artificial turf composition analysis: can a lab tell what an artificial grass yarn and backing are made of?
Short answer
We identify polymers, backing ingredients and additives in artificial grass, with separate findings for the yarn, backing cloth, backing adhesive and infill.
The report gives the materials and main ingredients in each part, their estimated proportions and the composition differences between reference and supplied turf.
To start, we need a new turf cut sample with its backing, loose yarn or new TPE or EPDM infill granules, plus any reference you want compared.
What are you really asking about artificial turf composition?
Is the grass yarn polyethylene, polypropylene or nylon?
Artificial grass commonly uses polyethylene, including LLDPE, in monofilament or slit-film yarn, with polypropylene in some curled yarns and polyamide, also called nylon, in other constructions.
We examine straight and curled yarn separately and report the polymer composition of each, keeping the backing cloth identified as its own component.
Green yarn formulations commonly contain colorants such as phthalocyanine green, iron oxides and titanium dioxide, alongside a light-stabilizer and antioxidant package.
Which additives and backing ingredients are present?
Typical yarn additives include hindered amine light stabilizers (HALS), benzotriazole or benzophenone UV absorbers, hindered phenol or phosphite antioxidants, and erucamide as a slip agent.
We identify the light-stabilizer ingredients and report their estimated contributions on the submitted-yarn basis.
For yarn additives, we connect erucamide findings with the slip-agent group and keep HALS, UV absorbers and antioxidants as separate entries in the ingredient table.
Zinc is interpreted together with organic stearate findings when assigning zinc stearate, and calcium is paired with carbonate and calcite evidence when describing the adhesive filler.
The backing commonly combines woven or nonwoven polypropylene cloth with styrene-butadiene latex or polyurethane adhesive containing calcium carbonate filler.
Infill materials include new TPE or EPDM granules, quartz sand and cork, each recorded separately from the yarn and adhesive.
What changed between the approved sample and a delivery?
For example, a turf importer who wants to check a delivery against an approved sample can compare corresponding straight yarn, curled yarn and backing adhesive.
We place polymer, additive and mineral findings side by side so the buyer sees which turf components have a changed composition.
How do we approach artificial turf composition analysis?
1. We clarify material identification, reference benchmarking or batch comparison, and review the specification, SDS and approved sample to define the yarn, backing and infill questions.
2. We record appearance and separate straight yarn, curled yarn, backing cloth, backing adhesive and infill, labeling each portion so findings refer to a named turf component.
3. FTIR identifies polyethylene, polypropylene, polyamide, styrene-butadiene latex and polyurethane features in the separated portions, and records carbonate features in the adhesive.
4. After extraction, GC-MS and GC-MS/MS identify slip agents and volatile antioxidants or UV absorbers, while high-resolution LC-MS and LC-MS/MS examine HALS, nonvolatile antioxidants and UV absorbers.
5. XRF records calcium, titanium, iron, copper, chlorine and zinc, and XRD identifies calcite, rutile or anatase titanium dioxide and talc to establish the crystalline filler and pigment findings.
6. ICP-OES or ICP-MS measures relevant elemental amounts, which we combine with mineral identities, extracted ingredients and polymer findings to estimate the backing adhesive’s filler and polymer proportions.
7. We reconcile each component with the specification and approved reference, then report its materials, main additives and estimated proportions, with paired results for a batch-comparison project.
Why can these techniques distinguish yarn, backing and infill ingredients?
FTIR reads the way chemical bonds absorb infrared light, giving polyethylene, polypropylene, polyamide and polyurethane their characteristic patterns in separated turf components.
GC-MS separates extracted ingredients that enter the gas phase and reads their mass patterns, and GC-MS/MS adds fragment evidence for individual additives.
High-resolution LC-MS supplies accurate molecular masses, and LC-MS/MS reads fragment relationships in dissolved HALS, antioxidants and UV absorbers.
XRF supplies the elemental pattern, XRD identifies crystalline minerals, and ICP methods measure elemental amounts for the composition balance.
In green yarn, copper and chlorine are interpreted with color and molecular findings when assigning phthalocyanine pigments, while titanium is paired with the XRD titanium-dioxide result.
What will the artificial turf report contain?
The English PDF report contains a conclusion card, an ingredient table, estimated proportions and a data appendix.
For a comparison project, the reference and your sample are reported side by side.
How do you send an artificial turf sample?
Send us photos of the turf and its specification or SDS, if available, through our inquiry page. We reply within 24 hours and confirm the analysis scope and quotation with you. Then follow our shipping guide to send the sample.
Which related guides should you read?
Our material-identification service explains polymer, ingredient and elemental analysis; Our UV-stabilizer guide covers films and clear coats, and this page follows those ingredients through the complete turf construction; Our TPE-compound guide explains polymer, oil and filler combinations relevant to TPE infill granules; Our batch-comparison guide explains paired sampling and ingredient comparisons across deliveries.
FAQ
Can you identify straight yarn and curled yarn separately?
Yes. We separate both yarn types, identify their polymer chemistry and report polyethylene, polypropylene or polyamide findings for each.
Can you distinguish latex backing from polyurethane backing?
Yes. We examine the adhesive portion and report styrene-butadiene latex or polyurethane chemistry alongside its mineral filler findings.
How do you estimate calcium carbonate in the backing adhesive?
We combine carbonate FTIR features, calcite XRD findings and measured calcium with the other identified adhesive ingredients to estimate its calcium-carbonate contribution.
Can you analyze an infill granule separately from the turf?
Yes. We examine new TPE or EPDM granules as separate samples and report their polymer, additive and mineral composition.