Brake pad friction material analysis: can a lab tell whether a brake pad is semi-metallic, low-metallic, NAO or ceramic?

Short answer

We identify binder, fiber, mineral and metal ingredients in brake friction materials and use their combined composition to describe semi-metallic, low-metallic, NAO and ceramic formulations.

The report lists the main components with estimated proportions, and a comparison project reports your factory batch and approved reference side by side.

To start, we need a new disc brake pad, drum brake shoe or friction block, plus the reference for a comparison project.

What are you really asking about brake pad composition?

Which composition describes the pad category?

Semi-metallic formulations contain substantial steel-fiber and iron-powder contributions; low-metallic formulations combine a smaller metal contribution with organic and mineral ingredients.

NAO formulations emphasize organic fibers, mineral fibers and fillers, while ceramic-type formulations use combinations of potassium titanate, mineral fibers and ceramic fillers.

We interpret these categories through the metal amounts and identified binder, fiber and filler composition together.

Which binders, fibers and mineral ingredients are present?

Phenolic resin is a common binder, including systems modified with cashew nut shell liquid or rubber; nitrile rubber is one rubber ingredient used in these formulations.

Reinforcement includes steel fibers, aramid pulp, mineral fibers and glass fibers, alongside iron powder, copper, brass or zinc in metal-containing blends.

Graphite, metal sulfides, cashew friction dust and rubber powder form part of the friction-modifier package.

Alumina, zirconium silicate and magnesium oxide are common abrasives; fillers include barium sulfate, calcium carbonate, mica, vermiculite and potassium titanate.

Our rubber-compound guide discusses elastomers and additives; here we examine rubber ingredients within a phenolic friction-material composite.

Which layer changed between an approved pad and a delivery?

In assembled pads, we distinguish the friction material, the underlayer, the steel backing plate and adhesive-coated or rubber-coated steel shims.

For example, an aftermarket brake brand that wants to compare suppliers can compare corresponding friction surfaces, interiors, underlayers and shim adhesive layers.

Our layer-selection guide explains matching sampling regions; we report each brake-pad layer against its corresponding reference layer.

How do we approach brake pad friction material analysis?

1. We clarify category identification, reference-part benchmarking or batch comparison, review specifications and approved samples, and identify the friction layer, underlayer or shim as the target.

2. We record appearance and cross-section layers, separating friction material from backing steel, underlayer and shim adhesive, and sample the friction surface and interior separately.

3. FTIR with ATR sampling examines phenolic, rubber and aramid features in resin-rich and fiber-rich portions, assigning the organic chemistry to each sampled region.

4. XRF records iron, copper, zinc, barium, zirconium, magnesium, aluminum, silicon, potassium, titanium, calcium and sulfur, giving the elemental composition of the friction material.

5. XRD identifies crystalline barium sulfate, graphite, zirconium silicate, magnesium oxide, alumina, mica, vermiculite, potassium titanate, calcium carbonate, iron and copper, assigning mineral and metal phases.

6. ICP-OES or ICP-MS measures elemental amounts, which we combine with the identified phases to estimate mineral and metal contributions.

7. GC-MS and GC-MS/MS examine extracted volatile and semi-volatile constituents associated with resin modification, rubber ingredients and organic additives, adding molecular findings to the binder description.

8. We reconcile all findings with specifications and matching reference regions, then report the formulation category, main components and estimated proportions for the sampled friction material.

Why can these techniques distinguish friction-material ingredients?

FTIR reads chemical-bond absorption patterns, distinguishing phenolic resin, rubber and aramid chemistry in separated portions of the composite.

XRF reads element-related fluorescence, while XRD reads ordered crystal structures to identify minerals, graphite and crystalline metals.

XRD then confirms that barium comes from barium sulfate, zirconium from zirconium silicate, and potassium and titanium from potassium titanate.

ICP-OES reads element-specific emitted light and ICP-MS separates elemental ions by mass-to-charge ratio, supplying elemental amounts for composition calculations.

GC-MS separates extracted molecules and reads their mass patterns; GC-MS/MS adds fragment evidence for retained resin-related and rubber-related constituents.

Combining these observations connects the organic binder, fiber-rich portions, mineral phases and metal amounts, giving a composition-based description of the formulation category.

What will the brake pad report contain?

The English PDF report contains a conclusion card, an ingredient table, estimated proportions and a data appendix.

For a comparison project, the reference and your sample are reported side by side.

How do you send a brake pad sample?

Send us brake pad photos and the ingredient list, specification or SDS, if available, through our inquiry page. We reply within 24 hours and confirm the analysis scope and quotation with you. Then follow our shipping guide to send the sample.

Which related guides should you read?

Our material-identification service explains polymer, ingredient and elemental analysis; Our pigment and filler guide explains elemental and ingredient identities; here we connect elements with friction-material mineral phases; Our FRP guide covers resin, glass and filler in fiberglass composites; this page examines brake friction composites; Our estimated-proportion guide explains ingredient identification and proportion estimates, which we report against the named friction-material layer.

FAQ

Can you check a pad described as ceramic?

Yes. We combine potassium titanate, mineral, fiber and metal findings to report the composition behind the ceramic description.

Can you identify barium sulfate in the friction layer?

Yes. We combine barium measurements with the barium sulfate crystal pattern and report that filler within the sampled friction layer.

Can you compare the underlayer separately from the friction material?

Yes. We sample corresponding underlayers separately, compare binder and filler chemistry, and report those differences alongside the friction-layer comparison.

Request a quote.