Heat-activated mounting adhesive analysis: can a lab tell what is in a dry mount tissue or mounting film?

Short answer

We identify the adhesive polymer, tackifier ingredients, additives, tissue carrier and release coating in heat-activated mounting films and dry mount tissues.

The report maps each layer and its main ingredients with estimated proportions, and a comparison project reports your delivery and approved mounting material side by side.

To start, we need a new roll or sheet, plus the reference mounting material for a comparison project.

What are you really asking about dry mount tissue composition?

Which polymer and tackifier form the adhesive?

Common adhesive bases include ethylene-vinyl acetate (EVA), polyolefins, ethylene copolymers, polyamides, thermoplastic polyesters, thermoplastic polyurethanes and heat-activated acrylic polymers.

These thermoplastic adhesives flow and wet the mounting surfaces when heated and pressed, then set as they cool.

Rosin esters, terpene resins and hydrocarbon resins are common tackifiers, accompanied by waxes, plasticizers and antioxidants in formulated blends.

Is it an adhesive film, a dry mount tissue or a pre-coated board?

A free-standing adhesive film consists of the adhesive sheet, while dry mount tissue has adhesive on both sides of a thin paper or nonwoven carrier.

Single-sided mounting films add release paper with a silicone coating; pre-coated mounting card and foam board add a facing paper beneath the adhesive.

We identify cellulose or polyester in the carrier and distinguish calcium carbonate, titanium dioxide and kaolin in the board-facing coating from adhesive ingredients.

Our tape and label guide covers pressure-sensitive cold-mounting constructions; this page examines heat-activated mounting sheets.

What changes between removable, permanent and replacement films?

We compare polymer chemistry, tackifier composition, waxes and plasticizers across products described as removable or permanent, reporting the ingredient differences.

For example, a framing supplier that wants another source can compare its approved roll with a proposed replacement, matching adhesive faces and carrier constructions.

Our heat transfer vinyl guide addresses garment lettering films and their heat-activated adhesive layers.

How do we approach heat-activated mounting adhesive analysis?

1. We clarify benchmarking, replacement sourcing or batch comparison, review specifications, SDS and approved samples, and record the removable or permanent product description to define the target.

2. We record appearance and the through-thickness construction, separating release paper, adhesive, carrier and board-facing paper so each finding retains its layer position.

3. FTIR with ATR sampling examines each separated layer for EVA, polyolefin, polyamide, polyester, polyurethane, acrylic, silicone and cellulose features, assigning its material chemistry.

4. After preparation, GC-MS and GC-MS/MS examine resin-associated small molecules, wax constituents, plasticizers and volatile additives to describe the tackifier and additive mixture.

5. High-resolution LC-MS and LC-MS/MS examine dissolved nonvolatile additives such as antioxidants, adding molecular identities to the adhesive ingredient table.

6. XRF records filler-related elements, XRD identifies crystalline calcium carbonate, titanium dioxide and kaolin, and ICP-OES or ICP-MS measures elemental amounts in the separated layers.

7. We reconcile molecular and mineral findings with specifications and corresponding reference layers, reporting layer materials, adhesive polymers, tackifier types, additives and estimated proportions.

Why can these techniques distinguish mounting adhesive layers?

FTIR reads chemical-bond absorption patterns: acetate carbonyl features identify EVA chemistry, amide bands identify polyamides, and urethane features identify polyurethane.

The full infrared pattern distinguishes polyolefin, polyester and acrylic adhesive chemistry, while siloxane-bond and cellulose features identify silicone release coating and paper carrier chemistry in their sampled layers.

GC-MS separates extracted volatile and semi-volatile molecules and reads mass patterns, with GC-MS/MS adding fragment evidence for plasticizers and resin-related constituents.

High-resolution LC-MS supplies accurate masses and LC-MS/MS examines additive fragments, identifying nonvolatile antioxidants in the adhesive extract.

XRD reads mineral crystal structures; XRF identifies the elements present and ICP-OES or ICP-MS adds elemental amounts, connecting the mineral identities with their composition estimates.

What will the mounting adhesive report contain?

The English PDF report contains a conclusion card, an ingredient table, estimated proportions and a data appendix.

For a comparison project, the reference and your sample are reported side by side.

How do you send a mounting adhesive sample?

Send us mounting material photos and the ingredient list, specification or SDS, if available, through our inquiry page. We reply within 24 hours and confirm the analysis scope and quotation with you. Then follow our shipping guide to send the sample.

Which related guides should you read?

Our deformulation service explains ingredient identification and proportion estimates; Our hot-melt guide covers adhesive sticks and pellets; this page focuses on mounting films and dry mount tissues; Our release-liner guide examines silicone-coated supporting sheets; here we assign the release coating separately from the mounting adhesive; Our layer-selection guide explains target-layer sampling, including how corresponding adhesive and carrier regions are compared.

FAQ

Can you distinguish EVA from a polyamide mounting adhesive?

Yes. We examine the separated adhesive by FTIR and report acetate-containing EVA chemistry or amide-containing polyamide chemistry alongside the additive findings.

Can you tell paper tissue from a polyester nonwoven carrier?

Yes. We examine the separated carrier for cellulose or polyester infrared features and report its material separately from the adhesive on each face.

Can you compare the additives in two mounting films?

Yes. We compare corresponding adhesive extracts for tackifier constituents, waxes, plasticizers and antioxidants, then report the ingredient differences and estimated contributions side by side.

Request a quote.